Engineered Sensors Tedeco Products by Eaton Aerospace Engineered Sensors Business Unit

Engineered Sensors
Tedeco Products

Tedeco Sight Plugs

Fused glass sight plugs with pressure tight sealFused Glass Models

These economical high strength sight plugs are fabricated from a carbon steel housing and a thick section of high strength glass. The pressure tight seal is formed by compression on the perimeter of the glass. Elastomers are entirely eliminated.

The sight plug's fused assembly is capable of high temperature and high pressure. Also, most special chemical compatibility requirements may be accommodated by a simple change of plating. Standard units are stocked with electroless nickel finish.

Sight plugs of carbon steel housing and pressurized glass

Model  Thread Hex Min.Burst
Pressure
(psi@70°F)
A B

  With Reflectors 

No  Reflectors
M1270  M1270W ¾-16 UNF 1 5000 .25 .40
M628EA* M628 2 ¼-12 UN 2-½ 1200 .41 .62
M141C M141 ¼-18 NPT 5/8 5000 .19 .43
M142C M142 3/8-18 NPT ¾ 5000 .22 .56
M143C M143 ½-14 NPT 15/16 5000 .22 .56
M144C M144 ¾-14 NPT 1-1/16 4000 .31 .63
M145C M145 1-11 ½ NPT 1 3/8 3000 .31 .75
M146C M146 1 ¼-11 ½ NPT 1 ¾ 2000 .41 .81
M147C M147 1 ½-11 ½ NPT 1600 .41 .81
M148C M148 2-11 ½ NPT 2-½ 1200 .41 .87
- M143F ½-14 NPT 15/16 5000** .22 .56
- M146D 1 ¼-11 ½ NPT 1-¾ 2000** .41 .81
- M148F 2-11 ½ NPT 2-½ 1200** .41 .87

*Assembled with Aluminum Float Ball .
**Recessed Lens.

Polymer sealed sight plugs with rubber sealPolymer Sealed Models

These sight plugs use a transparent plastic window with a synthetic rubber seal and are recommended for applications not exceeding 200°F (93°C). Pipe thread models use a steel body with corrosion resistant finish. Straight thread models use aluminum alloy body and are designed to accommodate an O-ring seal. Special housing and lens materials are available for severe environments. Also available with float balls or special level or identification markings. Contact our engineering department for special requirements.

Sight plug with synthetic rubber seal and transparent plastic window

Model  Thread Hex Min.Burst
Pressure
(psi@70°F)
A B
 With Reflectors  No Reflectors
M30  M30Z ¾-16 UNF 1 700 .36 .40
M31 M31Z 1-14 UNS 1-¼ 500 .40 .50
M32 M32Z 1 5/8-12 UNS 1-7/8 250 .48 .59
M123 M123Z 1/8-27 PTF ½ 1200 .30 .39
M124 M124Z ¼-18 PTF 5/8 1200 .34 .59
M49 M49Z 3/8-18 PTF ¾ 750 .40 .49
M36 M36Z ½-14 PTF 7/8 750 .40 .56
M35 M35Z ¾-14 PTF 1-1/8 500 .40 .66
M34 M34Z 1-11 ½ PTF 1-3/8  300 .40 .82
M128 M128Z 1 ¼-11 ½ PTF 1-¾ 250 .47 .81
M126 M126Z 1 ½-11 ½ PTF 2 250 .53 1.00

All dimensions are in inches unless other wise specified

Back to Sight Gages

liquid level sensors, indicators, breather vents, pressure sensors, gages, diagnostics

Home | Liquid Level Sensors | Snap Action Fill Caps | Breather Vents
Sight Gages | Magnetic Debris Detectors | Lube System Diagnostics
About Us | Contact Us |
Sitemap

Engineered Sensors — Tedeco Products 
24 East Glenolden Avenue - Glenolden, PA 19036
E-mail: industrialsales@eaton.com • Orders: 800-837-0475
General Information: 610-522-4000 • Fax: 610-522-4063


©Copyright 2003 Engineered Sensors - Tedeco Products

Website by Advance Design